Wissensdatenbank
Wissensdatenbank:
Restoring the ProxySG to default settings
Gepostet von Daniel Riediger an 30 August 2011 11:53

Problem Description

Restoring the ProxySG to default settings
You want to restore the system to default settings

Resolution

Restoring the System to Default Settings

There are 3 methods of restoring system defaults.

Restoring Factory Defaults
This option will reset all system settings, including the Setup Console password. To restore factory defaults, use the following CLI command:

    SGOS# restore-defaults factory-defaults

Retaining Console Settings
This option will retain settings like console username and password, front panel pin number, console enable password, SSH host keys, keyrings used by secure console services, RIP configurations, IP address, MTU size, TCP round trip time, and static routes. To restore defaults while retaining console settings, use the following CLI command:

    SGOS# restore-defaults keep-console

Restoring Defaults through the Management Console
If you restore defaults through the Management Console, you will lose most settings because there is no "keep console" option. To restore defaults through the Management Console, select Maintenance > General, click the Restore button, then click OK to confirm.

(0 Stimme(n))
Hilfreich
Nicht hilfreich

Kommentare (0)